Oil and Gas Industry Products & Services

D-2 Inc. offers a full line of both lab and in line sensors for the Oil and Gas Industry. From handheld conductivity meters, to in line conductivity meters, to free water and filtration lab equipment. ASTM Methods D2624, D3240, and D8073. 

Mobile Military Fuel Lab - PEAK KIT

PEAK Kit provides a full suite of mobile tests to determine fuel quality in hardened waterproof carrying cases compliant to ATPD-2424A. The case is designed to allow all of the testing to be completed in the case. This combines all the basic fuel testing required for aviation kerosene into one hardened and drop tested case. The case comes with batteries (military approved) that can run all the equipment, and can recharge via wall outlet or via adapter for the High Mobility Multipurpose Wheeled Vehicle (HMMWV). 

  • JF-1A-ST Hand Held Conductivity ASTM D2624
  • Digital Portable Density Meter ASTM D7777
  • Hydro-Light Free Water Detector ASTM D3240
  • Portable Particle Counter ASTM D7619 (Equivalent) 
  • Measurement Of Fuel System Icing Inhibitors FSII ASTM D5006 
  • CCCFP Continuous Closed Cup Flashpoint ASTM D6450 (USMC)

 

Fuel Laboratory Solutions

D-2 Inc. is pleased to introduce the Hydro-Light JF-WA1 Water Pad Tester. This device revolutionizes testing free water in aviation fuel. The Hydro-Light provides results efficiently with an easy one step measurement process. Just put the pad in the slide, put the slide in the machine and read the digital display, which displays the free water content of the fuel up to 50 PPM. This box is used to run ASTM Test Method D-3240. The Hydro-Light greatly improves the accuracy and reliability of the ASTM D3240 test method.

The JF-WA1 comes in three versions. The commercial version available to the public is the JF-WA1, the version set up for the US Navy, with a NSN 6640-01-642-9285 is the JF-WA1-N; and the third version is set up for the US Air Force NSN 6640-01-680-6773 and is the JF-WA1-AF. Product Page: JF-WA1 Hydro-Light Free Water Detector

 

 

WSI Water Separation Instrument – ASTM D8073-16

The CGSB have confirmed the inclusion of ASTM D8073 (IP624) in Table 1 (mandatory) of the Canadian Jet fuel specification, CGSB 3.23-2019

WSI for short is a revolutionary new technology that provides a repeatable and reliable water separation test. The WSI was developed to increase the reliability of the water separation from fuel measurement. The WSI filter is based on 5th Edition API certified materials.

WSI Product Page: https://www.d-2.com/wsi/

Please see the WSI Brochure:  https://www.d-2.com/wp-content/uploads/2021/07/485-315R0-1.pdf

Please See the ASTM D8073-16 Listing: https://www.astm.org/Standards/D8073.htm

The ASTM D8073 Test Method, the WSI has now been added to D1655, Appendix X1.13.2, and X1.13.2.2.

The ASTM D8073 Test Method, the WSI has also been added to the CGSB, under CAN / CGSB – 3.23 – 2019.

Product Page: WSI

The JF-1A-ST Handheld Conductivity and Temperature Meter is the industry’s easiest to use, most reliable and accurate device for measuring Fuel Conductivity especially for ASTM D2624 or meeting DEFSTAN 91-91. 

The JF-1A-ST is the upgraded and new design replacing the JF-1A-HH Handhelds. The Stick is far more cost effective, ergonomic, durable and simple to operate. Giving the end user the perfect tool for measuring conductivity in the field in fuel sample jars. 

Please Feel free to browse the JF-1A-ST Product Page for more detailed information: https://www.d-2.com/?page_id=1450

 

Automated Particle Counter – Density and Conductivity

Product Page: https://www.d-2.com/military-fuel-particle-counter-with-density-and-conductivity/

Particle Counter Brochure (Density and Conductivity)

This is the portable military hardened submersible / waterproof automated particle counter that also has conductivity and density measurement built in. This is Particle Counter is found in the PEAK Kit.  

The Particle counter provides equivalent testing for: ASTM D7619 Particle Counting, ASTM D7777 / D4052 Density and ASTM D2624 Conductivity. 

The particle counter has been built to use the standard military portable batter shown above or can be run from the battery pack found in the PEAK kit, or from wall power. Pictured below the Particle Counter can be ordered to come with the backpack version which is used for example on an aircraft carrier flight deck. The Particle counter has passed testing from -30°C to 50°C and proven it is submersible meaning it can handle operation in any conditions of weather. 

In Product Line Fuel Conductivity Solutions

The JF-1A In Line Conductivity Sensor is ideal for In Line Conductivity Measurement applications. Provides real time measurement of Conductivity for in process applications. ATEX, FM, FMc certified for pressures up to 16 Bar. Built with a fully retractable mount for easy installation and maintenance. ASTM D2624 Listed, IP 274. Custom Measurement Ranges from the 0-1,000 pS/m, 0-2,000 pS/m, up to 0-40,000 uS/m.

We offer a full variety of flanges and adapters to allow the JF-1A to be suited to any pre-existing piping structure. We also offer a local readout display as an optional extra. Product Page: JF-1A Sensor

The JF-1A-HP High Pressure In Line Conductivity Sensor is ideal for In Line Conductivity Measurement applications with line pressure above 16 bar. Provides real time measurement of Conductivity for in process applications. ATEX certified for pressures up to 100 Bar. Built with a customized flange mount for easy installation into existing pipe structures and flanges. ASTM D2624 Listed, IP 274. Custom Measurement Ranges from the 0-1,000 pS/m, 0-2,000 pS/m, up to 0-40,000 uS/m. More Information: JF-1A-HP Product Page

SDA, FSII and Lubricity Improver Injection Systems

SDA & JP-8 Additive Injection Systems. 

D-2 Inc. is the industry leader in building fully automated injection systems for SDA (Static Dissipative Additive) and FSII (Fuel System Icing Inhibitor). We design fully automated, injection systems using our In Line Conductivity sensors to provide direct real time control and quality assurance. Our systems send conductivity Data directly to your plant DCS system or a PLC Controller (i.e. “Top Tech DCS System”) and or can output to a local alarm or display.

Our SDA systems provide a level of direct control that only our company can offer. Combining D-2 Inc.’s expertise with conductivity, our unique SDA Injection Quills, and our JF-1A In Line sensor for direct conductivity control ensures D-2 Inc. will provide the best additive injection system possible, making Conductivity an issue of the past for your facility. SDA Product Page: https://www.d-2.com/?page_id=1127